316 stainless steel actually adds Ni, Cr, and Mo elements on the basis of 304 stainless steel. Because 316 stainless steel has better resistance to chloride corrosion than 304 stainless steel, it is widely used in the food industry, pharmaceutical industry, and surgical equipment industry etc.
Detailed introduction
Name: 316 stainless steel coil, 304L stainless steel coil
Material: 201, 202, 301, 302, 304, 304L, 310, 310S, 316, 316L, 321, 409, 410, 420, 430 and other materials.
Specifications: thickness 0.03 to 5.0MM width can be cut steel strips, thin strips, coiled strips, calendered strips and other strips (Note: Stainless steel calendered strips of various thicknesses and widths can be produced according to customer needs)
Surface: BA surface, 2B surface, 2D surface, NO.4 (frosted), HL (drawing), 8K surface, etc. Surface quality is good, good brightness Material varieties: stainless steel belt, stainless steel conveying Belt, stainless steel packing belt, elastic stainless steel belt, stainless steel coil belt, ultra-thin stainless steel belt.
Hardness: (HV) 160°-600° (soft state, 1/2H, 3/4H, H) and other first-class and second-class stainless steel coils.
Chemical Composition | |||||||
Grade | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Ni | Cr |
201 | 0.15 | 1.00 | 5.50-7.50 | 0.500 | 0.03 | 3.50-5.50 | 16.00-18.00 |
202 | 0.15 | 1.00 | 7.50-10.00 | 0.500 | 0.03 | 4.00-6.00 | 17.00-19.00 |
304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-11.00 | 18.00-20.00 |
304L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-12.00 | 18.00-20.00 |
309 | 0.20 | 1.00 | 2.00 | 0.040 | 0.03 | 12.00-15.00 | 22.00-24.00 |
309S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 12.00-15.00 | 22.00-24.00 |
310 | 0.25 | 1.00 | 2.00 | 0.040 | 0.03 | 19.00-22.00 | 24.00-26.00 |
310S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
316 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
316L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
316Ti | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
410 | 0.15 | 1.00 | 1.00 | 0.040 | 0.03 | 0.60 | 11.50-13.50 |
430 | 0.12 | 0.12 | 1.00 | 0.040 | 0.03 | 0.60 | 16.00-18.00 |
The differences between 316 and 316L stainless steel are as follows:
1. The molybdenum content in 316L stainless steel is slightly higher than that in 316 stainless steel.
2. The upper limit of the C content of 316 is 0.08%, while the upper limit of the C content of 316L is 0.03%. The higher the C content, the easier it is to cause intergranular corrosion.
3. The lower limits of tensile and yield strength of 316 are 515 and 205 MPa, respectively, and the lower limits of tensile and yield strength of 316L are 485 and 170 MPa, respectively.
4. Heat resistance. In the range of 800-1575 degrees, it is best not to use 316 stainless steel continuously, but when 316 stainless steel is used continuously outside this temperature range, the stainless steel has good heat resistance. The carbide precipitation resistance of 316L stainless steel is better than that of 316 stainless steel.
5. Heat treatment. Annealed in the temperature range of 1850-2050 degrees, then rapidly annealed, then rapidly cooled. 316 stainless steel cannot be hardened by overheat treatment.
6. Welding. 316 stainless steel has good weldability and can be welded by all standard welding methods. In order to obtain the best corrosion resistance, the welded section of 316 stainless steel needs to be post-weld annealed. Post weld annealing is not required if 316L stainless steel is used.
Packing: seaworthy wooden pallets,water proof paper,pvc film,interleaving paper, in 20' or 40' container or as per customers' requirements. |
-- 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) |
-- 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) |
-- 40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High) |
Q1:How about the shipping fees?
Shipping costs will depend upon many factors. Express will be the quickest but will be most expensive. Sea freight is ideal for large quantities, but slower. Please contact us for specific shipping quotes, which are dependent upon quantity, weight, mode and destination.
Q2:What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after you contact us for further information.
Q3:Do you have a minimum order quantity?
Yes, we do have minimum orders for specific international products, please contact us for more information.
